A) Model Name Setting „Mdl Name - Reely HCP80 Bedienungsanleitung

a) Model Name Setting „MDL NAME"
In order to be able to discern between model memories more easily it makes sense to give the memories the name of
the corresponding models. The name can consist of a combination of up to 6 letters, numbers or characters.
You can always change only the name of the model memory that is active at the moment. If you want to
change the name of another model memory, you need to call and activate the desired model memory first.
To set the name of a model memory, proceed as follows:
• Call the system settings menu.
• The menu item „MDL NAME" already has a black background
and can be called with the button „SELECT".
The display shows the currently called model memory, the
modulation type and the model type. In the model name, the-
re is an arrow pointing up below the first letter, showing that
this letter can now be set.
• Pushing the buttons „INC (+)" and „DEC (-)" sets the descri-
bed letter. The setting is saved automatically.
• Push the button „SELECT" to switch to the second letter. The
arrow pointing up jumps under the second letter.
• The second letter is set according to the same pattern as the
first one.
• Repeat the above procedure until the desired model name
has been programmed.
• Push the buttons „UP" and „DOWN" at the same time to re-
turn to the overview of the system setting menu.
88
Figure 23