Reely HCP80 Bedienungsanleitung Seite 107

• Then confirm the button „DOWN" to switch to the pitch curve
for flight mode „IDLE1".
• The pitch curve is set according to the same pattern as for
flight mode „NOR".
• Push that button „DOWN" to set an individual pitch curve for
the flight mode „IDLE2" and „HOLD" if required.
• Push the buttons „UP" and „DOWN" at the same time to re-
turn to the overview of the function setting menu.
Important:
Please observe that the pitch and throttle curves influence each other. If you lift the pitch curve in a specific
point, the larger angle of attack of the rotor blades may require lifting the throttle curve in this point as well.
Figure 43
107