EN 36
F
. 45 T
: T
1 – 16
IG
OP
OOL POSITIONS
B
: T
1 – 16
OTTOM
OOL POSITIONS
IN
IN THE TOOL MAGAZINE
DENTALCNC
Original Operating Instructions: K5+
Version: 12/16/2021
K5+ – Operation: Preparing jobs
6.6 Deactivating and activating the
ionizer
The ionizer considerably reduces the required cleaning
effort after dry machining. However, using the ionizer
also contributes to the overall compressed air
consumption of the machine.
You can decide whether you want to activate or deac-
tivate the ionizer via DENTALCNC. This is a general
setting that will affect all jobs that you machine.
To deactivate or activate the ionizer, do the fol-
lowing:
a. Start DENTALCNC.
a. Open the DENTALCNC Application settings with
the following icon in the main icon bar:
a. Open the General settings with the following
icon in the local icon bar:
b. Deactivate or activate the Ionizer activated option.