Installing The Switching Unit - VHF K5+ Originalbetriebsanleitung

K5+ – Installing the machine
3. Insert the suction hose of the suction device com-
pletely into the hose connection on the side of the
thread.
F . 17 I
IG NSERTING THE SUCTION HOSE INTO THE HOSE CONNECTION
4. Turn the thread of the hose connection clockwise
as far as you can.
The suction hose is firmly attached to the hose con-
nection.
5. Insert the hose connection into the opening for the
air extraction system of the machine. Ensure it is
firmly connected.
The installation of the suction hose with the
optional hose connection is complete.
F . 18 I
IG NSERTING THE HOSE CONNECTION INTO THE OPENING FOR THE AIR
EXTRACTION SYSTEM
5.7.4 Installing the sw itching unit
If you want the machine to automatically switch the
suction unit on and off, but a data cable is not avail-
able, you can use the optional switching unit. The
switching unit is not available worldwide.
1. Connect the power cable of the suction device to
the switching unit.
2. Connect the control cable of the switching unit to
the suction device data port at the connection
panel of the machine.
3. Plug the switching unit into a power socket.
F
THE MACHINE
Original Operating Instructions: K5+
Version: 12/16/2021
. 19 C
IG ONNECTING THE SWITCHING UNIT TO THE SUCTION DEVICE AND
EN 23