Technical Data - VHF K5+ Originalbetriebsanleitung

EN 14

4.11 Technical data

Dimensions (W/D/H)
Unit
Footprint (approx.) mm
in
Housing fully closed mm
(approx.)
in
Minimum required space for mm
operation (approx.)
in
Base system
Unit
Weight (approx.) kg
lbs
Axes
– Rotational axis A / B
Overvoltage category
(IEC 60664-1)
External compressed air supply
Unit
Min / max. air pressure bar
psi
Recommended air pressure bar
psi
Air consumption (approx.)
– Ionizer deactivated l/min
cfm
– Ionizer activated l/min
cfm
Air purity (ISO 8573-1:2010)
External air extraction system
Unit
Minimum extraction capacity l/min
cfm
Suction unit
Ambient conditions
Unit
Relative air moisture
Ambient temperature for stor- °C
age/transport
°F
Ambient temperature for °C
operation
°F
Location type
Maximum height above m
mean sea level
ft
Ambient air (IEC 60664-1)
Spindle
Unit
Model
Maximum rotational speed rpm
Nominal power under W
continuous operation (S1)
Nominal power under unin- W
terrupted periodic operation
Value
375 x 260
14.8 x 10.2
450 x 545 x 630
17.7 x 21.5 x 24.8
800 x 795 x 720
17.7 x 27.4 x 26.8
Value
91
201
5
360° / ± 35°
II
Value
6 / 8
90 / 120
7
100
50/64 (at 6/8 bar)
1.8/2.3 (at 90/120 psi)
80/102 (at 6/8 bar)
2.8/3.6 (at 90/120 psi)
Solid particles: class 3
Water content: class 4
Residual oil content: class 3
Value
2,500 (at 220 hPa)
88.3 (at 3.2 psi)
Designed for the commercial
use in the dental sector
Equipped with a filter of the
filter class M
Value
80 %, non-condensing
-20 – 60
-4 – 140
10 – 35
50 – 95
Indoor
2000
6561
Dust free, pollution degree 2
Value
SFK 300P (synchronous)
60,000
300
450
Original Operating Instructions: K5+
Version: 12/16/2021
Unit
(S6)
Peak power (P ) W
max
Diameter collet chuck mm
Tool changer
Unit
Maximum tools in magazine
Maximum tool length mm
Standard blank holder
Unit
Min. / max. disc diameter mm
Maximum disc height mm
Min. / max. height of the disc mm
rim
Connections
Unit
Pneumatic connection, push- mm
in fitting (Diameter)
Power connection V AC
Hz
W
Network port
– Speed
Data port for supported
suction unit or switching unit
Hose connection for external mm
air extraction system
(Diameter)
Pin assignment of the suction unit data port
F . 9 P
IG IN ASSIGNMENT OF THE SUCTION UNIT DATA PORT
1. + 24 V, switched, output 1
2. + 24 V, switched, output 2 (not used)
3. +24 V, continuous
4. Return signal output 2 (not used)
5. Return signal output 1 (not used)
6. Ground (PE)
K5+ – Machine overview
Value
500
3
Value
16
40
Value
98.5 / 98.8
40
9.8 / 10.5
Value
6
100 – 240
50/60
640
Glass fuse T6,3A L250V
RJ-45
10BASE/100BASE-
TX/1000BASE-T (Auto-
sensing)
Yes
45