Machine Overview; Front Side Of The Machine; Connection Panel; Working Chamber Door - VHF K5+ Originalbetriebsanleitung

EN 10
4

MACHINE OVERVIEW

With your K5+ you can process blanks of different
materials to create high quality objects for the dental
sector. You can find a list of the materials which you
can process with the machine in the manufacturing
software.
The machine is designed for dry machining.

4.1 Front side of the machine

F . 1 F
IG RONT SIDE OF THE MACHINE

1. Connection panel

2. Working chamber door

3. View window to the working chamber
4. Recessed grip for opening the working chamber door
5. Accessories container
6. Suction opening for the air extraction system
7. Identification plate
4.2 Connection panel
F
4.3 Working chamber door
The working chamber door locks the working chamber
and protects the user from injuries during operation.
You can open and close the working chamber door
manually.
You cannot open the door when the machine is
switched off or while the axes are moving.
F
Original Operating Instructions: K5+
Version: 12/16/2021
K5+ – Machine overview
. 2 C
IG ONNECTION PANEL
1. Power connection including glass fuse T6,3A L250V
2. Main power switch
3. Pneumatic connection (6 mm push-in fitting)
4. Network port (Ethernet RJ-45)
5. Suction unit data port (6 pins, IEC 61076-2-106)
To open or close the working chamber door, pull it
upwards or push it downwards with your hand. Use
the recessed grip of the door.
. 3 W
IG ORKING CHAMBER DOOR