The following items can be adapted by the user:
n
Back angle
n
Arm rest height
n
Arm rest position
n
Lower leg length
The footrests and side panels can be removed if needed.
6.1.1 Telescoping Anterior Frame
The telescoping anterior frame of the power wheelchair
allows the wheelbase to be adapted to the respective seat
(Figure 6). Since this setting involves a change to the centre
of gravity, it may only be carried out by an authorised
dealer.
B600
Downloaded from
www.Manualslib.com
manuals search engine
Figure 6
Telescoping anterior frame
6.1.2 Back Rest
The back rest can be set to 4 different positions by pulling
the release strap (base of the back rest, Figure 7).
Once the back rest is in the desired position, release the
strap to engage the locks.
02/2009
Operation
Page 115