Control Panel Holder; Height Adjustable Control Panel Holder; Swing-Away Control Panel Holder; Special Controls - Otto Bock B600 Bedienungsanleitung

7.6

Control Panel Holder

7.6.1 Height Adjustable Control Panel Holder

An optional special control panel holder can be mounted on
the power wheelchair, allowing the height of the control
panel to be adjusted. In order to do so, loosen the attach-
ment screw (see Figure 39) and move the control panel to
the desired height.
Figure 39 Height adjustment of control panel holder

7.6.2 Swing-Away Control Panel Holder

To allow the user to drive the power wheelchair closer to an
object or under the edge of a table, the control panel can be
swung to the side with a special control panel holder (see Fig-
ure 40).
B600
Downloaded from www.Manualslib.com manuals search engine
n
Apply slight pressure to move the control panel holder to
the side and release the pivot element.
n
Swing the control panel holder to the side.
n
When bringing the control panel holder back to its origi-
nal position, the pivot element automatically locks into
place.
Figure 40 Swing-away control panel holder
7.7

Special Controls

Various special controls such as the suck-and-blow control,
chin control, or foot control can be added to the B600 power
wheelchair.
Detailed information is contained in the "Special
INFORMATION
Controls" instructions for use.
02/2009
Accessories
Page 149