Sanyo Classic PAC i serie Einbauanleitung Seite 75

Outdoor unit control PCB
(Single-phase)
3 – 4 HP
HIC
Temperature
sensor
Up side
C2 (CN020, WHT)
MOV (CN25, WHT)
Bottom
side
5 HP
F101
MOV
(CN025, WHT)
TD (CN024, BLK)
TO (CN023, BLK)
TS (CN022, RED)
(3-phase)
System address rotary switch
3 – 4 HP
5 – 6 HP
AUTO ADD (CN041)
System address
Rotary switch (S002)
TERMINAL (S010)
JP007
System address
DIP switch (S003)
RC-P (CN032, RED)
LED1
LED2
PUMP DOWN (CN042)
EEPROM (IC006)
C1 (CN021, BLK)
TO (CN022, WHT)
TD, TS (CN023, WHT)
EXCT (CN026, RED)
QUIET MODE (CN028, WHT)
RC-P (CN032, RED)
FAN (CN030, WHT)
ROM (CN012, WHT)
OC (CN013, BLU)
EMG (CN014, BRN)
20S (CN09, WHT)
FUSE (25A, F003)
Varistor (VA002)
JP007
Varistor (VA001)
Terminal plug (CN015, BLK)
EMG (CN014, BRN)
OC (CN013, BLU)
ROM (CN012, WHT)
EEPROM (IC007)
PRY (CN110, YEL)
C2 (CN020, WHT)
C1 (CN021, WHT)
Fig. 10-21-1
System address 10s digit and 20s digit
DIP switch
Automatic address
button (black)
Terminal plug (black)
Terminal plug (CN015, BLK)
OC (CN013, BLU)
EMG (CN014, BRN)
JP007
ROM (CN012, WHT)
EEPROM (IC007)
TD (CN024, BLK)
TO (CN023, BLK)
MOV(CN025, WHT)
C2 (CN020, WHT)
C1 (CN021, WHT)
TS (CN022, RED)
Fig. 10-21-2
10-24. Test Run Procedure
Recheck the items to check
before the test run.
Check the combination (wiring) of
indoor and outdoor units.
YES Is system "single-type"?
(1 indoor unit is connected
Turn ON Are multiple outdoor units
the indoor
and outdoor
power.
(Automatic
Address)
(See 10-26-2) How to Set the Outdoor
Unit System Address
Set the outdoor unit system
address.
(See 10-26-1, 2) How to Set Automatic
Address
Set the automatic address
setting from outside unit.
Indicate (mark) the
combination number.
Set the indoor unit control
unit to "TEST".
Turn the power back ON to
the indoor unit.
73
(See 10-11)
(See 10-26-1)
to 1 outdoor unit)
NO
NO
used?
YES
(See 10-26-3, -4)
(See 10-26-3)
Refer to "Table of
NO
Can
Self-Diagnostic
operation be
Functions" to check
started?
the system.
In addition, refer to
10-26 and correct any
items that need to be
corrected.
YES
Note: Check the indoor-
side drainage.
(See 10-13)
Turn ON
the indoor
and outdoor
power.
(Automatic
Address)
(See 10-25)
Fig. 10-22