Transport; Using The Truck For The First Time - Jungheinrich AM I20x Betriebsanleitung

2

Transport

WARNING!
Accidental movement during transport
Improper fastening of the truck and mast during transport can result in serious
accidents.
Loading must only be performed by specialist personnel trained for this purpose.
The specialist personnel must be instructed in securing loads on road vehicles and
handling load securing devices. In each case correct measurements must be taken
and appropriate safety measures applied.
The truck must be securely fastened when transported on a lorry or a trailer.
The lorry or trailer must have fastening rings.
Use wedges to prevent the truck from moving.
Use only fastening belts with sufficient strength.
Use non-slip materials to securing the load aids (pallet, wedges, ...) e. g. non-slip
mats.
Securing the
transport
Requirements
– Load the truck.
– Park the truck securely, see page 26.
Tools and Material Required
– Lashing straps
Procedure
• Attach the lashing straps (20) to the
industrial truck and the transport vehicle
and tension sufficiently.
The truck can now be transported.
3

Using the Truck for the First Time

Procedure
• Check the equipment is complete.
The truck can now be started, see page 24.
Z
When the vehicle is parked, the surface of the tyres will flatten. The flattening will
disappear after a short period of operation.
20
industrial truck for
20
20