A Correct Use And Application Of The Truck - Jungheinrich EFG-DH ac 10 Betriebsanleitung

A Correct use and application of the truck

A
The “"Guidelines for the Correct Use and Application of Industrial Trucks”" (VDMA) are
included in the scope of delivery for this truck. The guidelines are part of these oper-
ating instructions and must always be heeded. National regulations are fully applica-
ble.
The fork-lift truck described in these operating instructions is a truck that is suitable
for lifting and transporting loads.
It must be used, operated and maintained according to the information in these oper-
ating instructions. Any other uses are outside the design envelope and can lead to
injury to persons or damage to equipment and property. Above all, overloading
caused by excessively heavy or unbalanced loads must be avoided. The max. admis-
sible load to be picked up is indicated on the identification plate or load diagram label
shown on the truck. The fork-lift truck must not be operated in spaces subject to fire
or explosion hazards, or in spaces where corrosive or very dusty atmospheres pre-
vail.
Duties of the user: A “"user”" within the meaning of these operating instructions is de-
fined as any natural or legal person who either uses the fork-lift truck himself, or on
whose behalf it is used. In special cases (e.g. leasing or renting), the user is consid-
ered the person, who, in accordance with existing contractual agreements between
the owner and the user of the fork-lift truck, is charged with the observance of the op-
erating duties.
The user must ensure that the truck is not abused and only used within its design lim-
its and that all danger to life and limb of the operator, or third parties, is avoided. In
addition to this, it must be ensured that the relevant accident prevention regulations
and other safety-related provisions, as well as the operating, servicing and mainte-
nance guidelines, are observed. The user must also ensure that all persons operating
the truck have read and understood these operating instructions.
m
If these Operating Instruction are not observed the warranty becomes void. The same
applies if improper work is carried out on the device by the customer and/or third par-
ties without permission of our Customer Service.
Mounting of attachments: The mounting or installation of any attachments which
will interfere with, or supplement, the functions of the truck is permitted only after writ-
ten approval by the manufacturer has been obtained. If necessary, the approval of
local authorities has to be obtained.
Any approval obtained from local authorities does not, however, make the approval
by the manufacturer unnecessary.
Trailing and slipping loads: The truck may only be used for trailing or slipping loads
for which the truck has been approved.
A 1