Operating The Lift Mechanism And Attachments (Multifunction Steering Wheel) - Jungheinrich EFG 430 Betriebsanleitung

4.7 Operating the lift mechanism and
attachments
wheel)
F
The multifunction steering wheel must only
be operated from the driver’'s seat. The
driver must be instructed in how to operate
the lifting unit and the attachments.
Lifting/lowering the fork carriage
–– Pull the button (28) to raise the fork
carriage.
–– Push the button (28) to lower the fork
carriage.
Tilting the mast forward / backward
F
When tilting the mast back, ensure no part of your body is between the mast and the
front panel.
–– Pull the button (26) to tilt the mast back.
–– Push the button (26) to tilt the mast forward.
Controlling attachments
F
Note the manufacturer’'s operating instructions and the capacity of the attachment.
Do not lift other people with the lifting device.
–– Pull or push the auxiliary hydraulics button ZH1 (29) to control the attachment
(e.g. sideshift).
–– Pull or push the auxiliary hydraulics button ZH2 (25) to control the attachment
(e.g. fork positioner).
–– You can use the toggle switch (27) to toggle from auxiliary hydraulics ZH1 (29) to
the auxiliary hydraulics ZH3. When the auxiliary hydraulics ZH3 are activated, an
LED on the toggle switch (27) lights up. Pull or push the auxiliary hydraulics button
(29) to control the attachment. When the toggle switch (27) is pressed again the
auxiliary hydraulics ZH3 are deactivated.
The distance moved by the button controls the lift speed of the hydraulic cylinder.
When the button is released it automatically reverts to neutral and the lifting
mechanism remains in the position it has reached.
M
Apply the buttons sensitively and avoid sudden movements. Release the button as
soon as the lifting mechanism reaches the limit position.
(multifunction steering
27
29 28 26 25
29 28 26 25
E 35