E Checking The Industrial Truck; Operational Safety And Environmental Protection; Safety Regulations For Checks - Jungheinrich AM I20x Betriebsanleitung

E Checking the Industrial Truck

1

Operational Safety and Environmental Protection

WARNING!
Risk of accidents and component damage
Any modification to the truck, in particular the safety mechanisms, is prohibited.
NOTE
Only original spare parts are subject to the manufacturer's quality control. To ensure
safe and reliable operation of the truck, use only the manufacturer's spare parts.
2

Safety Regulations for Checks

Lifting and jacking up
WARNING!
Lifting and jacking up the truck safely
In order to raise the truck, the lifting gear must only be secured to the points specially
provided for this purpose.
In order to raise and jack up the truck safely, proceed as follows:
Jack up the truck only on a level surface and prevent it from moving accidentally.
Always use a jack with sufficient capacity.
In order to raise the truck, the lifting gear must only be secured to the points
specially provided for this purpose, see "Transport and Commissioning" on
page 19.
When jacking up the truck, take appropriate measures to prevent it from slipping or
tipping over (e.g. wedges, wooden blocks).
Cleaning
CAUTION!
Fire hazard
Do not use flammable liquids to clean the industrial truck.
CAUTION!
Risk of component damage when cleaning the truck
Do not clean with a steam jet.
Z
After cleaning, carry out the test operations as described, see page 41.
33