Profinet Data Transmission And Configuration - HBM TIM-PN Montageanleitung

11

PROFINET data transmission and configuration

TIM-PN
PROFINET data transmission and configuration
Fig. 11.1 Fieldbus interface
The Fieldbus interface menu shows the cyclic data
channels and their statuses.
PROFINET On / Off:
S ON: The PN master is connected to the TIM-PN and
cyclic data is being exchanged
S OFF: The PN master is not connected to the TIM-PN
and no cyclic data is being exchanged
Interface Status, Interface Error and Interface Version
provide additional information
Interface Status:
S INIT: The device is in the initialization phase
A4341-2.0 HBM: public
81