Units And Filters - HBM TIM-PN Montageanleitung

Settings

10.3.3 Units and filters

Fig. 10.9 Units/filters
The Units/filters menu can be used to select the unit of
measurement, decimal places and sign for the measured
quantities. You can also activate various low-pass filters
(0.1 Hz ... 3 KHz or OFF).
CASMA (Crank Angle Synchronous Moving Average)
filter
The CASMA filter is a moving average filter with low-pass
filter characteristics. The filter does not work on a time
base, in the usual way, instead it uses angular synchron­
ism, which allows an automatic response to changes in
TIM-PN 39
A4341-2.0 HBM: public