HBM TIM-PN Montageanleitung Seite 57

Example
Measuring range 1:1
Transmission of torque to
low-pass filter 1 (TP1)
TIM-PN
Fig. 10.16 Supporting points approximation for full and partial
range calibration
The filter characteristics selected/set in accordance with
menu item 3.3 Units and filters (or section 10.3.3
"Units and filters", page 39) from the the above screen­
shot are automatically adopted.
A4341-2.0 HBM: public
Settings
Measuring range 1:5 / 1:10
Transmission of torque to
low-pass filter 2 (TP2)
55