HBM TIM-PN Montageanleitung Seite 63

Settings
Module configuration
Modules can only be configured once the passcode has
been entered. Each module is configured independently
via the Ethernet X5 interface. So each module is given a
separate IP address. In the delivery condition/individual
operation, all modules are parameterized as "masters".
To use Intercommunication mode, the modules must be
programmed as "super-master" or "slave", as described
in Fig. 10.20.
Fig. 10.20 Parameterization of TIM-to-TIM communication in
the web server
If the modules are operated via the 10+2 interface, the
head-end, i.e. the left-hand module, to which the torque
TIM-PN 61
A4341-2.0 HBM: public