HBM TIM-PN Montageanleitung Seite 67

TIM-PN
Fig. 10.23 Operating torque transducers with digital interfaces
(TMC) and frequency signals in a network
Information
TMC input mode: All the diagnosis functionalities on
PROFINET are available, see Chapter 11.
"Frequency" input mode: Only the Measured value over­
flow or underflow ±120% diagnosis error flag related to
the nominal (rated) torque is available. None of the other
diagnosis functionalities for torque are available.
In addition to this, when using the frequency output, it is
not possible to trigger the shunt signal via the TIM-PM.
Information
Frequency mode is suitable for HBM torque transducers
A4341-2.0 HBM: public
Settings
65