HBM TIM-PN Montageanleitung Seite 84

PROFINET data transmission and configuration
Name in GSDML file
Torque value LP1
Torque value LP2
Speed value LP1
Speed value LP2
Angle value
Power value
Live counter value
Rotor temperature value
Status byte value
82
S Online: The device is online, but no PN Master is con­
nected
S Connect: The device is connected to the PN Master
and cyclic data is being exchanged.
S Interface Error:
- No error: No error detected
- HW: Hardware error
- LIC: License error
- WD: Watchdog error
- NV: Memory error
- PRO: Protocol error
S Interface Version:
TIM PN application version
Cyclic input data (from the controller viewpoint)
Data type
Integer32
Integer32
Integer32
Integer32
Integer32
Integer32
Unsigned32
Integer16
Unsigned8
A4341-2.0 HBM: public
Description
Torque TP1
Torque TP2
Speed TP1
Speed TP2
Angle of rotation
Power
Incremented with every measurment
value
Temperature of rotor
Bit0
0 No action
TIM-PN