Fieldbus Interface - HBM TIM-PN Montageanleitung

Settings

10.3.4 Fieldbus interface

Fig. 10.14 Fieldbus interface
The Fieldbus interface menu shows which channels are
actually output on the PROFINET interface. Depending
on which TIM modules (Torque Module, Speed Module)
have been parameterized, the following measured values
will be available. Also see Chapter 11
"PROFINET Datenübertragung und Konfiguration".
You can specify how the measurement system should
react to incorrect measured values under Failure Set­
tings. The following settings are possible:
TIM-PN 47
A4341-2.0 HBM: public