HBM TIM-PN Montageanleitung Seite 56

Settings
54
Example 2
Input interpolation equation
Select the channel to which Supporting points approxima­
tion should be applied, and now select Interpolation
gradient from the Interpolation points equation menu
item. Pressing the Save button adopts the entered gradi­
ent factor. Then activate Supporting points approximation
for low-pass filter 1 and/or 2 with ON, or deactivate it with
OFF.
If you have a calibration certificate for the connected
torque flange, you can take these parameters directly
from the calibration certificate.
Gradient factors
Dual-range - using full and partial range calibration
There are two Supporting points approximations avail­
able. This allows the the torque transducer to be be per­
fectly adjusted and in tune with two different measuring
ranges (full and partial range).
A4341-2.0 HBM: public
TIM-PN