HBM TIM-PN Montageanleitung Seite 59

TIM-PN
Information
If, for example, a torque transducer calibration is per­
formed in the application and the frequency input is used,
the setpoint/actual values must be entered in [Nm/Hz] in
the table display to be used when using the TIM rotation
speed input. The TIM measurement display cannot be
used to to read off the actual values in this case, as this
is a digital realization of the measured value, i.e. in Nm.
A4341-2.0 HBM: public
Settings
57