Supply Voltage - HBM TIM-PN Montageanleitung

Electrical connection
RA
RB
TX
RX
RA
RB
TX
RX
18
Terminal X4, torque transducer frequency
Pin Assignment
1 Measurement signal 0V; symmetrical, color code
gray
2 RA, torque measurement signal 5V, color code red
3 RB torque measurement signal 5V, color code white
4 Not in use
5 Not in use
Terminal X4, torque transducer TMC
Pin Assignment
1 DGND (digital GND), color code purple
2 RS422-RA, color code red
3 RS422-RB, color code white
4 RS‐232‐TX, color code gray
5 RS‐232‐RX, color code green
7.4

Supply voltage

The module must be operated with a separated extra-low
voltage (nominal supply voltage 18 to 30V DC ), which
usually supplies one or more consumers within a test
bench.
Should the device be operated on a DC voltage network,
additional precautions must be taken to discharge excess
voltages.
A4341-2.0 HBM: public
TIM-PN