Connection To A Pc Or Network; Change Ip Address - HBM TIM-PN Montageanleitung

Connection to a PC or network

9 Connection to a PC or network
22
You can operate the interface module either in a network
or directly connected to a PC/laptop. The interface mod­
ule has an Ethernet interface (RJ45 socket) for the con­
nection.
The TIM-PN has the default IP address 192.168.1.2 in
the factory setting.
9.1

Change IP address

1. Open a web browser (e.g. Internet Explorer) and enter
the current IP address, e.g. http://192.168.1.2.
2. Under Device settings ³ Network, open the net­
work settings and enter a new IP address.
3. Click on Accept settings to activate the new IP
address. The change takes effect immediately. To
obtain access again, you must now enter the new IP
address in the web browser.
A4341-2.0 HBM: public
TIM-PN