Creating Tim-Pn Modules - HBM TIM-PN Montageanleitung

TIM-PN
PROFINET configuration with the TIA portal

12.3 Creating TIM-PN modules

The next steps add distributed I/O systems to the hard­
ware configuration.
► Open the Hardware catalog.
► Change to the Network view.
► Open the Other field devices and PROFINET IO
folders.
► Open Hottinger Baldwin Messtechnik GmbH and
the smart torque folder with the TIM-PN interface
module located there.
► Finally, use drag & drop to move the TIM-PN interface
module to the Network view.
A4341-2.0 HBM: public
91