Settings
You can make settings to the torque transducer in the
Passcode entry menu. Various parameters can also be
set here for the connected speed encoder (internal/exter
nal).
A passcode is required to set the frequency output in the
torque transducer, stator output connector 1.
In the delivery condition, the passcode is activated and
no settings can be made. It is only possible to change the
parameters after pressing the Unlock settings button.
The passcode must be a 4 digit number combination.
Notice
The standard delivery passcode is 0000.
The passcode is stored in the stator of the torque trans
ducer. It is thereby independent of TIM-PN.
TIM-PN
67
A4341-2.0 HBM: public