HBM TIM-PN Montageanleitung Seite 62

Settings
60
Fig. 10.19 TIM-PN coupling
Notice
Only TIM-PN modules from HBM can be operated on the
10+2 interface. The operation of other modules and mod­
ules from other manufacturers is not allowed and could
destroy the TIM-PN.
Electrical connection
The electrical connection proceeds as described in sec­
tion 7 "Electrical connection", starting on page 14. Please
note that in intercommunication mode, the X2, TMC X4
supply and the X3 speed sensor can only be connected
to the head-end (Super-Master module).
Only one feeding point (head-end/super-master) is ne­
cessary in this case (see Fig. 10.19). Ensure that the
power supply is sufficiently capable.
A4341-2.0 HBM: public
TIM-PN