HBM TIM-PN Montageanleitung Seite 64

Settings
62
transducer is connected, must always be parameterized
as the Super-Master. The module or modules that has/
have no connected torque transducers are then con­
figured as "slave".
TIM-PN intercommunication is designed for the operation
of max. 4 torque interface modules on a torque trans­
ducer (see Fig. 10.21).
Super-Master
Fig. 10.21 Configuration of the interface modules when using
intercommunication mode
Once intercommunication functionality has been para­
meterized, the modules must always be restarted. The
settings are then adopted the next time the modules are
restarted.
A4341-2.0 HBM: public
Slave
... max. 4x TIM-PN
TIM-PN