Electromagnetic Compatibility; Electromagnetic Emissions - Acteon Endocenter Benutzerhandbuch

4. This warranty shall automatically be void if the unit is repaired, modified, or in any manner tampered by the user or by
unauthorized third parties.
5. For repairs under warranty, the user must contact only the dealer or the manufacturer's authorized service centers, or the
manufacturer themselves. It is the responsibility of the user to ensure that the packing is in perfect condition or in any ca se
suitable for safely shipping the unit.
6. Controversies regarding application of the warranty or the quality or condition of the devices supplied shall not grant the purchaser
the faculty to suspend payment for the devices, in full or in part by installment.
7. The purchaser shall have no right to request compensation for device down-time.
8. This warranty expressly excludes defects:
- caused by damage during shipping.
- which are not attributable to manufacturing defects but rather to normal wear caused by proper use of the device (and in
particular, calcification and wear of the parts subject to wear).
- caused by atmospheric events such as (for example) lightning, by fires, and by humidity and in general by any other situation
or event not directly attributable to the manufacturer.
9. This warranty does not include transportation costs.
The warranty has validity only if accompanied by the billing document proving date of purchase of the product.
Note
The manufacturer has the right to modify the device and/or the user manual without prior notice.
Service Form
In case your device is defective please return it to SATELEC
Your address (or stamp):
Name:
Street:
Post code, place, country:
Telephone:
Fax:
E-mail:
Contact person:
The device was purchased on (date):
at (e.g. dealer, or sales rep.):
Please clean and sterilize the device before returning it, and include all accessories.
®
SATELEC – After Sales Service
17 Avenue Gustave Eiffel, BP30216
F- 33708, Mérignac Cedex, France

12. ELECTROMAGNETIC COMPATIBILITY

Important:
The power cord, the ultrasonic handpiece cords and the multifunction footswitch cord must be kept away from each other.
The device requires special precautions to be taken with regard to electromagnetic compatibility.
It must be installed and prepared for use as described in chapter 4.
Certain types of mobile telecommunication devices such as mobile telephones are likely to interfere with the device.
The recommended separation distances in this paragraph must therefore be complied with.
The device must not be used near or on top of another device.
If this cannot be avoided, its operation under the conditions of use must be checked beforehand.
The use of accessories other than those specified or sold by SATELEC
emissions or decreasing the immunity of the device.

12.1 ELECTROMAGNETIC EMISSIONS

The device is intended for use in the electromagnetic environment specified in the table below. The user and/or installer must ensure th at
the device is used in such an environment.
®
and include the following information:
®
as replacement parts may have the consequence of increasing the
20