Product Description; Construction And Function; Combination Possibilities - Ottobock 3R80 Gebrauchsanweisung

1 Product description

INFORMATION
Last update: 2016-03-11
► Please read this document carefully before using the product.
► Follow the safety instructions to avoid injuries and damage to the product.
Instruct the user in the proper and safe use of the product.
►
► Please keep this document in a safe place.

1.1 Construction and Function

The 3R80* Prosthetic Knee Joint is a monocentric prosthetic knee joint with rotation hydraulics
and a mechanically controlled stance phase stabilisation system. It is waterproof and equipped
with a manually operated lock. The prosthetic knee joint has a pyramid adapter (3R80) or
threaded connector (3R80=ST) as the proximal connection.
The integrated rotation hydraulics control the swing phase and secure the stance phase. Damp­
ing for flexion, extension and the stance phase are individually adjustable. This allows comfortable
walking over a broad range of speeds.
Stance phase damping is activated when bearing weight on the prosthesis. The activation
threshold is adjustable. It provides for stance phase flexion up to 4° while bouncing, and more
than 4° while yielding. Walking on slopes and down stairs step-over-step is therefore possible.
An extension assist spring supports the swing phase by generating an extension moment. The
additional spring included in the scope of delivery can be installed to increase the extension
moment.
The lock keeps the prosthetic knee joint at full extension. This function is suitable for situations
where flexion is to be prevented (e.g. when standing for extended periods of time or wading
through water).

1.2 Combination possibilities

INFORMATION
When fabricating a prosthesis for the lower limbs, all of the prosthetic components used have to
meet the requirements in regard to the patient's body weight and activity level.
Prosthetic components that are especially well suited for combination with the product are listed
below.
Designation
Prosthetic Feet
Foam Cover
In a waterproof walking aid, the product can be combined with prosthetic components from the
Ottobock Aqualine product line.
For additional combination possibilities, please see the catalogue 646K2* or consult the manufac­
turer.
2 Application
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Area of application according to the MOBIS mobility system:
20 | Ottobock
Reference Number
1A30, 1C30, 1C40, 1D35, 1E56, 1C60, 1C61, 1C62
Waterproof:
1C63, 1C64
3S107
English