HBK TIM-PN Montageanleitung Seite 40

Table of failures in rotational speed
Speed system not
present [static]
Speed value overflow
or underflow
[dynamic]
Speed system cannot
be sufficiently
determined
[static]
Compatibility failure
[static]
Table of failures in angle of rotation
Speed system not
present [static]
Speed system cannot
be sufficiently
identified
[static]
Reset with zero index
[static]
Compatibility failure
[static]
38
Web browser selection is set to "determine automatically from
transducer" and the torque transducer is not outputting any
information about the speed system or a speed system is not
present.
The speed value exceeds the maximum value (nominal (rated)
rotational speed + 105%)
Web browser selection is set to "determine automatically from
transducer" and the torque transducer cannot determine the
properties Pulses/Rev., Max. Speed, Type.
Or the selection is set to "Manual" and the maximum speed is
set to 0 or "-".
The stator and rotor speed systems are not compatible in
physics or in version.
Web browser selection is set to "determine automatically from
transducer" and the torque transducer is not outputting any
information about the speed system or a speed system is not
present.
Web browser selection is set to "determine automatically from
transducer" and the torque transducer cannot determine the
properties Pulses/Rev., Max. Speed, Type.
The web browser selection is set to "determine automatically
from transducer" and reset with zero index active, but no zero
index is present or cannot be determined if present
The stator and rotor speed systems are not compatible in
physics or in version.
TIM-PN
SETTINGS