Project - Hbk Tim-Pn Montageanleitung

You can protect your settings in the Passcode entry menu. Other users can only read
your settings, not change them. The zero setting and activation of the shunt is independ­
ent of the passcode.
In the delivery condition, the passcode is activated and no settings can be made. It is only
possible to change the parameters after pressing the Unlock settings button.
The passcode must be a 4 digit number combination.
Information
The standard passcode is 0000.

10.3.2 Project

Fig. 10.8 Dialog for assigning the project name
The Project menu is used to assign project names, change units and filters and view
fieldbus settings.
The project name also appears on the tab in the web browser, so that the connected TIM-
EC units can be recognized.
TIM-PN
29
SETTINGS