Scheppach SC55P Originalbetriebsanleitung Seite 37

15. Troubleshooting
Fault
Engine does not start
Engine power diminishes
Improper scarifying
Motor runs, cutting roller
does not rotate
Possible cause
Engine brake lever not pressed
Spark plug is defective
Fuel tank empty
Fuel valve closed
Ground too hard
Scarifier housing clogged
Blade heavily worn
Air filter dirty
Blade is worn
Incorrect scarifying depth
Belt torn
Belt loose
www.scheppach.com
Remedy
Press engine brake lever
Replace spark plug
Refill with fuel
Fuel valve open
Correct scarifying depth
Clean housing
Replace blade
Clean the air filter
Replace blade
Correct scarifying depth
Have checked by customer service workshop
Retighten belt
GB | 37