Scheppach SC55P Originalbetriebsanleitung Seite 32

23. Never use the machine with damaged or missing
safety guards, e.g. without deflectors and/or catcher.
24. Disconnect all work tools and drives before start-
ing the engine.
25. Start or press the starter switch with caution in
accordance with the manufacturer's instructions.
Ensure that your feet are far enough away from the
work tool(s).
26. When starting the engine, do not tilt the machine
unless it has to be lifted during the process. In this
case, only tilt as far as absolutely required and
only lift the side away from the operator.
27. Do not start the engine if you are standing in front
of the ejector chute.
28. Close the throttle valve when running down the en-
gine; if the engine is equipped with a petrol shut-off
valve, close this after aerating the soil or scarifying
29. Switch the motor off by removing the spark plug
connector and the ignition key on machines with
a battery starter:
- if you leave the machine
- before refuelling
30. Switch the motor off by removing the spark plug
connector and the ignition key on machines with
a battery starter:
- before releasing blockages or rectifying ob-
structions in the ejector chute,
- before checking or cleaning the machine, or
performing work on it,
- if it came into contact with a foreign object. In-
spect the machine for damage and perform the
required repairs before starting again and work-
ing with the machine,
- if the machine starts to vibrate unusually strong-
ly (inspect immediately)
Corrective maintenance instructions
Switch off the motor prior to cleaning, repairing, in-
specting or adjusting the machine and ensure that all
parts in motion have been stopped.
Disconnect the ignition cable and position the cable
away from the spark plug in order to prevent accidental
starting.
Have the machine repaired by qualified personnel
using only original spare parts. This ensures that the
safety of the machine is upheld.
32 | GB
6. Technical data
Type of engine
Displacement
Max. motor perfor-
mance
Rotation speed
Fuel
Tank contents
CO² output
Engine oil
Spark plug
Oil/tank capacity
Depth setting
Working width of
Number of blades
Blade Ø
Catch basket capacity
Weight
Subject to technical changes!
Information about noise level measured in accordance
with applicable standards:
Sound pressure L
Sound power level L
Measurement uncertainty K
Wear hearing protection.
Exposure to noise can cause hearing loss.
Vibration:
Vibration A
Measurement uncertainty K
Keep the noise level and vibration to a minimum!
• Only use faultless products.
• Maintain and clean the product at regular intervals.
• Adapt your working methods to the product.
• Do not overload the product.
• Have the product checked if necessary.
• Switch the product off if it is not in use.
• Wear gloves.
www.scheppach.com
Single-cylinder / 4-stroke
10W 30 / SAE 30
= 78.6 dB
pA
= 100.5 dB
wA
= 1.9 dB
pA
(left/right) = 8.38 m/s2
hv
= 1.5 m/s²
pA
212 cm³
4.1 kW/5.5 HP
3400 rpm
Unleaded petrol
3.6 l
289.55 g/kWh
F7RTC
0.6 l
+10 / -12
400 mm
15
165
40 l
31.2 kg