View And Save Results - Pce Instruments Pce-Tu 3 Bedienungsanleitung

8.2.7

View and save results

If measurements have been carried out for all planes, press
There are two reference models, you can switch between by pressing
Ref Points Mode: If one of the reference points is undefined, the result is the unchanged detector value. If
two reference points are defined, the result is the difference between the calculated reference line and the
detector value.
To define reference points, press
Press to save. In order to delete the reference points, enter the value
Best Fit Mode: In this mode, the result is the difference between the calculated best fit reference line and
the detector value.
The result can be displayed as a graph or as a table. By pressing
illustrations.
To save the results, press
Number of
calculated planes
Table view
Result X- Result Y-
axis
Save result
measurement
Press , to return to the main screen of the program or press
and enter reference point number 1 and reference point number 2.
. Refer to chapter 10 "Handling of the Data Dialogue window" to do that.
Yellow indicates
a violation of the
axis
Number of
reference point
Repeat
Manual
for the result.
tolearnce
graph view
, to start the Live Mode.
72
.
, you can switch between these
Red indicates a
violation of the
tolerance