Carry Out Measurements; Duration Of The Connection Establishment - Pce Instruments Pce-Tu 3 Bedienungsanleitung

7.7.6

Carry out measurements

Press in the main screen of the program, to make the measurement screen appear.
What should be noted in this window
Align the transmitter very carefully with the
help of a spirit plane, to receive a result as
accurate as possible.
Functions in this window
- Carry out measurement
- Manually entering data (if activated)
7.7.7

Duration of the connection establishment

Depending on which interface is used to connect the sensors (Bluetooth or serial), the connection
establishment can take between 2 and 30-40 seconds. It is recommended to wait about 10 seconds
(cable connection) or about 50 seconds (wireless connection). If no connection is established after that
time, check the sensors and the system settings of the PCE-TU 3.
Manual
Shortcuts in this window
53
Switch to the opposite site (12 or
6 o'clock position)
Manually entering of the receiver
value (V)
Manually entering of the receiver
value (H)
Manually entering of the angle
(necessary for the position
confirmation)
Switch between measurement
units
Open context menu
Carry out or replace
measurement
Move through measurement
points