PCE Instruments PCE-TU 3 Bedienungsanleitung Seite 39

7.2.4.2 Entry of tolerances
To enter tolerances, press
Functions in this window
- Selection of industry standard tolerances via
the RPM selection
- Manual tolerance entry
Parallel misalignment
tolerance
Angular misalignment
tolerance
Measurement unit
Manual
Shortcuts in this window
Adjust tolerances via RPM (rotations
per minute)
Manual entry of tolerances
If the RPM selection is activated:
Raise RPM by one step.
If manual entry is activated:
Select parallel misalignment
If RPM selection is activated:
Reduce RPM by one step.
If manual entry is activated:
Select angular misalignment entry
Save and exit
39
RPM selection (U/min)