8.1.12 Define Reference Points; 8.1.13 Result Modes - Pce Instruments Pce-Tu 3 Bedienungsanleitung

Manual
No reference plane Laser Plane Best-Fit Plane

8.1.12 Define reference points

To define or delete reference points, use the arrow key. With the help of those, you can select a position
and confirm with . You can only define or delete reference points in the Laser Plane mode.

8.1.13 Result modes

There are three different modes to view the results.
Original: Values are shown as positive and negative values
All positive: Values are shown relative to the lowest value; values cannot be negative.
All negative: Values are shown relative to the highest value; values cannot be positive.
Original All positive All negative
65