Spindle Program - Pce Instruments Pce-Tu 3 Bedienungsanleitung

Manual
Machine which is
currently selected as
Current
stationary (reference)
machine
machine.
Vertical results
Current machine
number
Horizontal results
No or invalid data were
acquired or invalid
dimensions were
entered
Press , to save the
measurement result
7.6

Spindle Program

To align spindles (for example of lathes), mount the transmitter (Sensor S by default) to the chuck and the
receiver to the tool slide.
To start the Spindle Program, select "Spindle" in the main menu and press
. The main screen of the
Spindle Program will appear.
47