Editing Screen For Circular Grid; Carry Out Measurement - Pce Instruments Pce-Tu 3 Bedienungsanleitung

8.1.8

Editing screen for circular grid

Use and to select the ring and
Coordinates of the
selected point
[Ring, position
(clockwise)]
Change ring
diameter
Reserved, do not
use
Add ring (external)
8.1.9

Carry out measurement

Press in the grid screen, to get into the measurement screen. Use the arrow keys to select points.
You can skip those points, where no values are necessary or where no measurements can be carried
out.
What should be noted in this window
Wait until the data are ready before carrying out
another measurement (sandglass symbol must not
be blinking)
Functions in this window
- Carry out measurement at the selected point
- Delete the selected point
- Replace measurement data at the selected point
Manual
and to select the position.
Top side angle = 0°
Increasing clockwise
Chosen ring
diameter
Add point (position)
Delete point (position)
62
Selected point
Position of the
selected point
To the
measurement
screen (press
Save
Shortcuts in this window
Delete selected point
View result
Save
Back to the grid screen
Carry out measurement
)