Create Circular Grid; Edit The Grid - PCE Instruments PCE-TU 3 Bedienungsanleitung

8.1.5

Create circular grid

To create a new circular grid, press
, to navigate through the entering fields. Enter the amount of rings (from 2 to 10) and the amount of points
per ring (from 3 to 40). Press
8.1.6

Edit the grid

Use the arrow keys, to navigate through the grid.
What should be noted in this window
All required dimensions need to be entered
Functions in this window
- Change line position / radius of the ring
- Change column position
- Add/delete line/ring
- Add/delete column/point
Manual
or the corresponding menu item and press
, so save and to get to the screen where you can edit the grid.
60
. Use
Number of rings
(from 2 to 10)
number of rings
(from 2 to 10)
Number of points per
ring (from 3 to 40)
Shortcuts in this window
Change the line/ring position of
the line/ring, which the selected
point belongs to
Change the position of the
column, which the selected point
belongs to
Add line/ring. Line is added on
the bottom; ring is added as an
outer ring
Delete line/ring, which the
selected point belongs to
Add column/point. Column is
added on the right side; point
clockwise
Delete column, which the
selected point belongs to
Save
Go to measurement screen
and