PCE Instruments PCE-TU 3 Bedienungsanleitung Seite 22

Select first phase
Select second phase
Current parallel
misalignment (Offset)
The Offset setup is a process consisting of two steps. Start with the first phase. Three digits need to be
accepted here. Having accepted these values, hit
until the value becomes 0 and wait for 5 seconds. Push
the Offset menu, the
Manual
symbol appears to display the Offset settings.
to get to the second phase. Adjust the laser beam,
to save the Offset value. After you have left
22
Accepted values in the
first phase
Accepted values in the
second phase
Delete current parallel
misalignment (Offset)