Configuration Process; Screen Overview - PCE Instruments PCE-TU 3 Bedienungsanleitung

7.7.4

Configuration process

Enter the amount of measurement points (positions) by pressing
and 300). If the measurement points are arranged in the same distance to one and another, press
and make sure that the checkbox for "same distance" is activated. Press
the points are arranged in different distances to each other, use
and press , to enter the distance to the next point. Repeat the process, until all distances are entered.
To change parameters, press
To activate or deactivate the manual data entry, press
To activate or deactivate the manual angle entry, press
To switch between measurement units, press
To perform averaging, press
To save and exit the parameter screen, press
7.7.5

Screen overview

Distance between
point 1 and point 2
Distance between
point 2 and point 3
(selected)
Manual
. The parameter screen will appear.
.
, enter the sample number and confirm by pressing
.
Direction of the
laser beam
(transmitter)
52
and then enter a value (between 2
and enter the distance. If
and , to select the required point
.
.
Current distance
.
Amount of the
current
measurement
point
Number of
measurement
points