Carry Out Plumbline Measurement; Main Screen Of The Program - PCE Instruments PCE-TU 3 Bedienungsanleitung

7.7.2

Carry out Plumbline Measurement

To start the program, select „Plumbline" in the main menu of the instrument and press
screen of the program will appear.
7.7.3

Main screen of the program

What should be noted in this window
The required dimensions should be entered
correctly (can be changed later on, if
recommended).
The manual angle entry should always be
used for vertical shafts
Functions in this window
- Create/modify/view points
- Change parameters
- Enter dimensions
- Start measurement
- View results (available, if all required
measurements are finished)
- Save
- Load
Manual
Shortcuts in this window
51
. The main
Start a new measurement
Enter amount of measurement
points (positions)
Activate/deactivate to equate all
distances
Enter current distance
Change parameters
Note: The inclinator cannot be
used for vertical measurements
View results (available, if all
required measurements are
finished)
Save results to a file (see
chapter 10 „Handling of the
Data Dialogue window")
Load saved results from a file
(see chapter 10 „Handling of
the Data Dialogue window")
Select a point to enter the
distance