Create Or Edit A Rectangular Grid - Pce Instruments Pce-Tu 3 Bedienungsanleitung

Manual
From the left to the
Auto router off
right and vice versa
From top to bottom
and vice versa
8.1.4

Create or edit a rectangular grid

To create a new rectangular grid, press or select the according menu item and press . Use
and , to move between the entering fields. To define the grid, you need to enter the amount of
columns (from 2 to 40) and the amount of lines (from 2 to 40) in the beginning. Furthermore, you need to
enter a value for the total width/length or line/column spacing. Every time, you change the total
width/length, the values for the line/column spacing are recalculated (and vice versa). The grid is defined
with constant line/column spacing. Single spacings can later on be changed independently from another.
Press , to save and to get to the screen where you can edit the grid.
Number of columns
(from 2 to 40)
Number of lines (from
2 to 40)
59