Bosch BPT-C 200 Betriebsanleitung Seite 144

52 | Installation
NOTICE
BPT-C 200, 300, 350 | Operating manual
3. Crimp the cable lugs.
Material damage due to loose screw connections
If the specified tightening torques are not observed, the screws may work
themselves loose as a consequence of magnetic influences or vibration in
the connection bars. Loosened screw connections change the resistance
and the conductivity at the connection. This can adversely affect operation
of the product, which may in turn suffer damage.
Check connections before commissioning the device

Leave screws and nuts untreated. Do not treat with grease or otherwise

Thread size
M12
Tightening torque (Nm)
93
Bosch Power Tec GmbH
English