Safety Signs On The Device - Bosch BPT-C 200 Betriebsanleitung

14 | Safety
CAUTION
CAUTION
BPT-C 200, 300, 350 | Operating manual
Material damage due to blocked ventilation
If foreign objects are blocking the ventilation channels, this can cause
both material damage and loss of income.
Keep central inverters, floors and air ducts free of foreign objects.

Keep air inlets and outlets in the central inverter and the operating area

free of foreign objects.
Material damage due to loose screw connections
If the specified tightening torques are not observed, the screws may work
themselves loose as a consequence of magnetic influences or vibration in
the connection bars. Loosened screw connections change the resistance
and the conductivity at the connection. This can adversely affect operation
of the product, which may in turn suffer damage.
Check connections before commissioning the device

Leave screws and nuts untreated. Do not treat with grease or otherwise

2.7

Safety signs on the device

Safety signs Description
Indicates a hazard
Indicates a hazard resulting from an excessive touch current if
a protective earth has not been installed correctly
Discharge time is 15 minutes
15 min 15 min
Denotes the disposal: Device must not be disposed of as
household waste. Device must be disposed of correctly in
accordance with national regulations.
Indicates transformerless device
Refer to the operating manual
English
Bosch Power Tec GmbH