Hard Reset; Reset To Factory Defaults - MADRIX PLEXUS Handbuch

Hard Reset

Important Information
The following instructions is to be seen with great caution!
It is only included for your information until you might need it.
Perform a hard reset only when really needed!
There are two button combinations in order to perform hard resets.
A) Reset To Factory Defaults
You may reset your device to factory default settings. That means the original settings will be
restored.
Step 1) Disconnect your device from USB/Power. (The device needs to be turned off.)
Step 2) Depending on your display rotation, press and hold OK and DOWN at the same time.
(Continue to hold the two buttons.)
Step 3) While pressing the two buttons, connect USB/Power again.
Step 4) Depending on your display rotation, press UP to perform a hard reset.
(Please try both directions, UP and DOWN, due to the possible display rotation should the
brightness of the display be too dark.)
© 2017 inoage GmbH
MADRIX PLEXUS User Manual (English) 143