Extension Port - MADRIX PLEXUS Handbuch

30 MADRIX 3 PLEXUS User Manual / Handbuch

Extension Port

1.2.5
Overview
MADRIX PLEXUS features a 15-pin, serial connector with individually addressable ports. The
extension port makes it possible to connect external analog or digital devices for remote control.
Extension port specifications:
In MADRIX, please open the menu 'Tools' > 'PLEXUS Configuration... ' > 'Extension Ports' to
configure each port individually for the corresponding PLEXUSConfiguration. Select a PLEXUS
Configuration first. For more information, see
Available Settings
The following table shows available settings of the individual pins:
Pin Assignment
1
2 Port 1
3 Port 3
4 Port 5
5 Port 7
6 Port 9
7 Power
8
9 Power
10 Port 2
11 Port 4
12 Port 6
13 Port 8
14 Port 10
15
15-pin, D-Sub, US, female
Available Settings
Ground
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output
Digital Input, Digital Output
Ground
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output
Digital Input, Digital Output
Ground
Stand-Alone Mode.
5V, 100 mA max. (shared with Pin 9)
5V, 100 mA max. (shared with Pin 7)
© 2017 inoage GmbH