Enabling Network Drivers In Madrix - MADRIX PLEXUS Handbuch

Enabling Network Drivers In MADRIX

Please note: Enabled network drivers are required for the Ethernet connection from your PC
to the device.
Please make sure to activate the driver for the Ethernet (network) connection in the MADRIX
Options. To access the Options of MADRIX, please press 'Ctrl+Alt+O' or go to the menu
'Preferences' -> 'Options...'. Now go to the tab 'Devices Network'.
Select 'Enable LUNA / NEBULA / PLEXUS /STELLA' and click 'Apply'. Close the dialog with 'OK'
.
© 2017 inoage GmbH
MADRIX PLEXUS User Manual (English) 49